The Purple Pinup Guru Platform

I want to elaborate here and simplify —

Sparky Blogs: I think it's high time for Cary to get a Scooter or Motorcycle ...

Some of you know the Guru - who does his very chatty Depositman comic book. He needs wheels and he is unaware of this fact. Someone I respect said it's impossible to look cool on a scooter. They do have their good points as to licensing and such but I'm thinking either the Nighthawk:
Honda Nighthawk

or the Eliminator used would be a good start:

Assuming a KLR250 like this isn't found:

I speculate that our Guru pal on a scooter in the tunnel on Sepulveda Blvd near Mulhulland Drive is too huge a danger. I welcome ideas. This is Cary at work.

Now we examine Scooters -

Scooter

The image “http://upload.wikimedia.org/wikipedia/commons/c/c6/Piaggio_mp3.jpg” cannot be displayed, because it contains errors.

A scooter is a style of two-wheeled motor vehicle with certain design characteristics such as a step-through frame, small wheels, automatic transmission and small engine. The definition is evolving as motorcycle designs change over time. Historically, a scooter was noted for a small engine, small wheels, a step-through design, a forward fairing with floor boards, and possibly under-seat storage. Modern scooters cover a broad spectrum of designs: step-through or step-over frames, small or large wheels, front fairings or floor boards, under-seat storage or not, and manual or automatic transmissions. Most scooters today feature automatic transmissions.

At one end of the current market, the Vespa LX series reflects the scooters' historical antecedents: small wheels, floor boards, front fairing, inner fairing storage. At the other end, the Honda Big Ruckus featured no bodywork, floorboards or step-through frame, but was still classified as a scooter. The Piaggio MP3, with two front wheels (three wheels total) reflects the fluid nature of the scooter classification. Modern scooters have a wide range of engine displacements, from under 50 cc to over 799 cc, and some have engine locations in stark contrast to classic scooter design (e.g. Yamaha T-Max 500, Suzuki Burgman 650, Gilera GP800).

Generally the term "scooter" is not defined in law, as laws are based on characteristics such as engine size and power, and maximum speed. The United States Department of Transportation defines a scooter as having a platform for the operator's feet or has integrated footrests, and has a step-through architecture.^[1] In the UK the term Moped is normally used to refer to scooters and is legally defined as a motorcycle with an engine no bigger than 50cc and a maximum speed restricted below 50Kph.

Description

A 1980s "twist and go" scooter.

The classic scooter design features a "step-through" frame and a flat floorboard for the rider's feet. This design is possible because the scooter engine and drive system transferring power to the rear wheel is attached to the rear axle or under the seat. Unlike a motorcycle, where the engine is mounted on the frame, this front-hinged arrangement allows the engine to swing vertically together with the rear wheel. Older Vespas, most vintage scooters and some newer retro models have axle-mounted engines with a manual transmission and the gear shift and clutch controls built into the left handlebar. Most newer scooters use a Continuously Variable Transmission (CVT).

Unlike most motorcycles, scooters usually feature bodywork, including a front leg shield and body that conceals all or most of the mechanicals. There is often some integral storage space, either under the seat, built into the front leg shield, or both. Most modern motor scooters have smaller wheels than motorcycles, 8 to 12 inches (20 to 28 cm) in diameter, though maxi- and big-wheel scooters may have larger wheels. Most scooters have smaller engines than motorcycles, 30 cc to 250 cc with a single cylinder, though larger models have twin cylinder 400 to 650 cc. motors.

Most jurisdictions have no legal definition for "scooter". Most states and countries classify scooters having engines smaller than 50 cc as mopeds, and subject them to lower safety restrictions and licensing fees. Scooters above 50 cc are usually legally considered motorcycles, although some states have an in-between definition for motorized bike for scooters and motorcycles between 50 and 150 cc.

Flyscooter Il Bello, a modern scooter with a classic look.

Until recently, most modern motor scooters came with air-cooled two-stroke cycle engines with automatic two-stroke oil injection although some of the higher spec small ones and large ones are water cooled such as the Honda FC50 or the 2002 Yamaha YQ50s. Scooters increasingly have four-stroke engines to meet stricter emissions controls. Trends around the world have seen new variations on the classic scooter. A common variation, the big-wheel or commuter-style scooter features wheels as large as a motorcycle. Popular models of the commuter-style bike include the Aprilia Scarabeo models, the Piaggio Liberty/LT models, and the Taiwanese Kymco People models. Four-stroke scooters which favor a classic vintage look include the Genuine Buddy and Stella models and Flyscooters Il Bello model.

High-end scooter models now include comprehensive technological features including cast aluminum frames, engines with integral counter-balancing, and cross-linked brake systems. Some of these scooters also have comfort features such as an alarm, start button, radio, windshield, heated hand grips and full instrumentation (including clock or outside temperature gauge).

In an effort to reduce emissions, there are now LPG powered scooters that run on liquefied petroleum gas (LPG) instead of petrol or diesel. High-powered electric road scooters are on the horizon since small electric motorcycles like the Vectrix, e-max, and the eGO have been released.^[2]^[3]

History

Scooter-like traits began to develop in motorcycle designs around the 1900s. In 1894, Hildebrand & Wolfmueller produced the first successful two-wheeler, with a step-through frame. Its fuel tank was mounted on the down tube, its parallel two-cylinder engine was mounted low on the frame, and its cylinders moved fore-and-aft. It was water-cooled and had a radiator built into the top of the rear fender. It became the first mass produced and publicly sold powered two-wheel vehicle, and among the first powered mainly by engine rather than foot pedals. Maximum speed was 40 km/h (25 mph). The rear wheel was driven by pistons similar to those in a locomotive. Only a few hundred such bikes were built, and the high price and technical difficulties made the venture a financial failure for both Wolfmüller and his financial backer, Hildebrand.

In France, the Auto-Fauteuil was produced since 1902. In United States, the Motoped is believed to be the first scooter to enter production, in 1910.

Since 1914, the Autoped Company of Long Island City, New York produced a compact scooter for short trips. The driver stood on a short platform with 15-inch tires. After riding, the steering column, which contained all operating controls, was folded over the platform to store the scooter in a compact space. The engine was an air-cooled, 4-stroke, 155 cc engine over the front wheel. The bike came with a headlamp and tail lamp, a Klaxon horn, and a toolbox. Developed during wartime and gasoline rationing, it was quite efficient, but did not achieve widespread distribution.

In 1919, British engineer Granville Bradshaw created the ABC Skootamoto which had a seat. Its single-cylinder 123 cc OHV engine, designed by Bradshaw, sits above the rear wheel and drives it by chain. The pansaddle and spacious footboard provide comfort. The Skootamota is a rare archetype of modern motor scooters. Bradshaw also designed a few other special engines, such as the ABC flat twins, the oilcooled singles and the engine of the Panther Panthette.

The Kenilworth is another classic vintage scooter made in England in 1919. Powered by a 142 cc overhead valve engine, it reached 20 mph (32 km/h). Electric lights were a first on this machine, but its brakes worked exactly as on a bicycle.

Salsbury's Motor Glide was a tiny motorbike built in 1936 in the back of a plumbing and heating shop in Oakland, California, by E. Foster Salsbury and inventor Austin Elmore. It had an enclosed body and an automatic transmission. It was such a success that in 1938 Salsbury attempted to license the design to several European manufacturers including Piaggio. The Motor Glide was the first depression era scooter, and set the standards for all later models. It inspired production of motor scooters by Powell, Moto-scoot, Cushman, Rock-Ola, and others. Salsbury produced the first automatic scooter with a continuously variable transmission (CVT).

The Cushman Company produced motor scooters from 1936 to 1965. Light, compact, and rugged, they were widely used by the US military in World War II and as an alternative to automobiles in the years before and after the war. Cushmans were easy to ride and had an automatic clutch which allowed the rider to twist the right grip to go and step on the pedal to stop. The step-through design and ease of operation made it popular with men and women alike. Cushman claimed an efficiency of 75 miles per gallon, and a penny-a-mile operating cost. The scooters usually weighted about 250 to 335 pounds (110-152 kg) and some had as much as 9 horsepower (6.7 kW). The most successful Cushman model, the Eagle, was produced for about 16 years. With its exposed engine and top tanks, it resembled a motorcycle. Other Cushman models used a traditional step-through design of most motor scooters. One of the most famous was the “Model 53”, a military model from the WW2 era. It was designed to be dropped by parachute with Army Airborne troops, so it became known as the “Cushman Airborne”. It was also used around military bases for messenger service.

After WW2, most wartime aircraft manufacturers began producing scooters, and this created the first two-wheeler boom in Japan. The Mitsubishi Silver Pigeon was a scooter largely made of warplane wheels and discarded warplane parts. It eventually shared popularity with the Fuji Rabbit, a motor scooter produced in Japan by Fuji Heavy Industries from 1946 to 1968. Production of the initial model, the S-1 began in 1946, some six months before the Vespa and was largely inspired by scooters used by American servicemen during and after WW2. Fuji Rabbit were the first Japanese-made scooters that could exceed 60 mph (97 km/h). Later models were among the most technologically sophisticated of their era, featuring electric starters, automatic transmissions and pneumatic suspension systems. As the Japanese economy expanded, demand for scooters shrunk, and Fuji diversified into automobiles in 1958. Although less known outside Japan, the Fuji Rabbit became a symbol of nostalgia in Japanese pop culture.

A Vespa with the engine mounted on the right side

In post-WW2 Italy The Piaggio Vespa became the standard for scooters around the world for 35 years. Patented in April 1946, it used aircraft design and materials. D’Ascanio's 98 cc scooter had various radical design concepts, including a sleek, stress-bearing structure. The gear shift lever was moved to the handlebars for easier riding. The engine was placed near the rear wheel, eliminating the belt drive. The typical fork support was replaced by an arm similar to an aircraft carriage for easier tire-changing. The elegantly styled body protected the driver from wind and road dirt, and bore little resemblance to uncomfortable and noisy motorcycles. The smaller wheels and shorter wheelbase provide improved maneuverability through narrow streets and congested traffic. Combining the best elements of automotive, aeronautical and motorcycle design, the Vespa quickly became an icon of design and economy. The name reportedly originated when Piaggio's president upon seeing the prototype, remarked Sembra una vespa, "It looks like a wasp".

Months after the Vespa, in 1947, Innocenti introduced the Lambretta, beginning a rivalry with Vespa. The scooter was designed by Innocenti, his General Director Guiseppe Lauro and engineer Pierluigi Torre. It debuted in 1947 at the Paris Motor Show. The Lambretta 'A' went on sale on December 23rd 1947 and sold sold 9,000 units in one year. It was efficient, 160-180 mpg , at a time when petrol was severely rationed. It had a top speed of 45 mph (72 km/h), and a direct air-cooled engine with 123 cc. The Lambretta was named after the region where the factory stood.

The Maicoletta motor scooter of the 1950s was one of the largest produced in that era. The engine was a single cylinder 247 cc piston port 2-stroke (277 cc for use with a sidecar), with four foot-operated gears and centrifugal fan cooling. The tubular frame was built on motorcycle principles, with long travel telescopic forks and 14-inch wheels. The Maicoletta had a top speed of 70 mph (110 km/h) which was comparable with most 250 cc motorcycles of the time.

The image “http://upload.wikimedia.org/wikipedia/commons/thumb/6/66/HeinkelTourist-Bj1956-173ccm-9%2C2PS.jpg/800px-HeinkelTourist-Bj1956-173ccm-9%2C2PS.jpg” cannot be displayed, because it contains errors.

Heinkel Tourist of 1956

Germany's aviation industry was also dismantled after WW2. Heinkel stayed in business by making bicycles and motorbikes. The Heinkel Tourist was a large and relatively heavy touring scooter produced in the 1960s. It provided good weather protection with a full fairing and the front wheel turned under a fixed nose extension. It had effective streamlining, perhaps thanks to its aircraft ancestry. Although it had only a 175 cc 4 stroke motor, it could sustain speeds of 70 mph (110 km/h). Heinkel scoooters were known for their reliability.

Zundapp Bella was the most popular German scooter manufacturer in the 1960s. It was in production for about ten years, in two engine sizes, 150 cc and 200 cc. They could perform all day at a steady speed of 60 mph (97 km/h). Extremely reliable and very well made, many of these scooters still exist today.

In the US, the Harley-Davidson Topper scooter was produced from 1960 to 1965. It had a fiberglass body and a pull-cord starting mechanism much like a lawn mower. It had a 165 cc DKW gas motor, a variant of the DKW 125 cc gas motor taken by the US from Germany in a war reparations deal. It only went 40 mph (64 km/h), and had no front brake. Very few units were sold. Harley-Davidson has not produced other scooter models, but smaller models, including the Shortster and Sprint, produced by Italian manufacturer Aeronautica Macchi S.P.A.. were in America under the Harley-Davidson name.

In England in 1962, the Triumph Tigress was a luxury scooter with good performance and handling like a motorcycle, drawing on Triumph's long experience of building fast motorcycles. It was sold with a 175 cc 2-stroke single engine, or a 250 cc 4-stroke twin. Both had four foot-operated gears. The 250 twin sold well and could reach 70 mph (100 km/h) with efficient suspension and good roadholding despite having only 10-inch wheels. But the Tigress broke often. The BSA Sunbeam was an identical machine with the BSA label.

In the 1980s new versions of scooters began to be released and become popular, especially in Japan and far-east Asia. This style of scooters began to reflect that of larger, sporty, higher-performance motorcycles of the time and the trend has continued till now. With the release of the Honda Ruckus, new trends towards dirt-bike scooters are just beginning. In 1988, Honda introduced a large, touring scooter design, the 250 cc Helix (also called Spazio, Fusion or CN250). Although it was bulky to handle at low speeds and was derisively called a "Barcalounger on wheels", it was designed for riding long distances in comfort. Now nearly all major scooter manufacturers produce such models, called "maxi", "GT" or "touring" scooters. The largest scooter made is now the 650 cc Suzuki Burgman, known in Japan as the Sky Wave.

In 1996, Peugeot launched the Scoot'Elec, the first electric moped. It is powered by a 2.8 kW (4 hp) DC motor fed by an 18V, 100Ah battery made of 3 Saft nickel-cadmium "monoblocs". A lot of body panels and suspension parts come from Peugeot's entry-level gas scooter, the Zenith. But the frame is different, built around a "double cradle", and holding the batteries low between and behind the driver's feet. Under the seat are the electronic controller, onboard charger and a curly charging cable with a standard plug. The fast on-board charger (1,400 Watt) uses a 230V power supply. The batteries charge from empty to 95% full in two hours, with 3 more hours to equalize.

The classic styling of the Vespa never lost its popularity, and remains the most popular and most imitated scooter design. Almost all manufacturers now carry both a classic/retro model and a sporty/modern model.

Popularity

Larger Piaggio X9 scooter suitable for long distance touring

In many parts of the world, such as Asia and Europe, motor scooters are a popular form of urban transportation due to their low cost and easy driving position. In fact, in many nations in Asia, scooter sales growth outpaces automobile sales growth. For many people, a motor scooter is the family vehicle until sufficient funds to purchase an automobile are amassed, although in crowded cities, scooters can be preferred over automobiles regardless of cost, due to parking, storage, and traffic issues.

In Taiwan, road infrastructure have been built specifically with two wheelers in mind, with separate lanes and intersection turn boxes. In Thailand, scooters are used for street to door taxi services, as well as for navigating through heavy traffic. Motor scooters are popular because of their size, fuel-efficiency, weight, and typically larger storage room than a motorcycle. In many localities, certain road motor scooters are considered by law to be in the same class as mopeds or small motorcycles and therefore they have fewer restrictions than do larger motorcycles.

According to the Motorcycle Industry Council, sales of motor scooters in the United States have more than doubled since 2000. The motorcycle industry as a whole has seen 13 years of consecutive growth. According to council figures, 42,000 scooters were sold in 2000. By 2004, that number increased to 97,000. ^[4]

In the last few years, new technology has emerged, such as fuel-injected scooters, which are efficient and durable. Aprilia released the SR Ditech in 2001. The fuel consumption of this direct injection scooter is one litre of fuel for 50 kilometres of driving (117mpg). Later on, more brands, such as Derbi and Peugeot, started using direct injection systems for their scooters. Due to new environmental laws, scooters had to change because the Euro3 standard allows only four-stroke engines. Some scooter drivers don't agree this is a good solution because they are used to two-stroke motors. Also, while four-stroke engines generally grant sufficient performance in sizes from 100 cc upward, 50 cc four-strokes tend to have barely enough power to drive at city speeds.

China has become the largest manufacturer of scooters, producing over 50% of the world's supply.^[5] With lower prices and better quality control, China is now making scooters that meet strict US DOT & EPA standards. In the 2000s, scooters have gained popularity in Latin America, specifically in Puerto Rico.

Maxi-Scooters

Another trend in the USA and elsewhere sees larger scooters, called maxi-scooters, with engines ranging in size from 250 cc up to the latest 839 cc machine (the Gilera GP 800) and using larger frames than the normal size scooters but not necessarily big displacement. This trend began in 1985 when Honda introduced the CH250 Elite/Spacy, and continued with the 1999 introduction of the Suzuki Burgman 400. A few years later, Suzuki launched the Burgman 650. Honda (600 cc), Piaggio, Yamaha, Aprilia, Kymco (700 cc) and others have also introduced scooters with engine displacements ranging from 400 to 850 cc. Honda's PS250 or Big Ruckus defies common scooter classification in that its step-through is high and the bike features no bodywork but rather a motorcycle-like exoskeleton.

The more advanced (and expensive) maxi-scooters differ from traditional scooters in that the engine is mounted on the frame, as opposed to the swing-arm. This arrangement can improve the handling, by allowing the centre of gravity to be moved forward and making fewer demands on the rear shock absorber(s). A final drive is necessary to connect the clutch assembly to the rear wheel. This trend toward larger, more powerful scooters with fully automatic transmissions is matched by an emerging trend in motorcycle design that foreshadows automatic transmission motorcycles with on-board storage. This is exemplified by the Aprilia NA 850 Mana automatic-transmission motorcycle that provides built-in storage for a full-face helmet.

Scootering terms

Bangkok: Vespa scooter in transport-business

A scoot is a nickname for scooter.
A scooter rally is an overnight event for scooterists that may include camping, group rides, sales of scooter parts and related merchandise, parties and concerts. The Garden City Rally, held every Victoria Day in Victoria, British Columbia, is the longest continuously running scooter rally in North America.^[6]
A meet is a single-day event in which scooterists from various areas gather in one spot. A scooter meet may include a group ride.
A run is an overnight event in which people from a single area ride to an overnight destination (e.g. Portland and Eugene's: Run From The Sun) In the case of the Cannonball Run, there are multiple overnight destinations.^[7]
A ride is a one-day event in which scooterists from a single area ride together.

Footnotes

External links

Wikimedia Commons has media related to:

Scooters

These seem to have appeal though ...

Sport 125

and

Zip 125

These are partly self assemble at home ... They seem to be no-name (though I think Taiwanese or Italian). On the other hand, 60-100 mpg, convenience, and not having to worry about a license are all very nice.